jBridge教程-说明书翻译

大家好今天给大家介绍一款电脑软件，jBridge教程的相关教程。

Performance mode

-processes the audio asynchronously，with one buffer of extra latency .may not work well with some hosts/plugins. don\\\'t enable this option if you\\\'re using a plugin that will send midi data to the host ，or you may experience dropped midi data.

高性能形式

-老子会异步处理音频，有一个额定的推迟缓冲。某些插件或是主机或许无法运用。假如你丫正运用一个MIDI插件，不要启用此项，否则或许会使MIDI数据丢掉。

jBridge教程-说明书翻译图1

audio master get time hack

-requests the time info during the audio processing (may reduce CPU load)

音频通道机动处理

-老子按音频恳求的时刻信息处理（可他妹的下降CPU负荷哟）

use thread safety measures in aux host

-if you\\\'re absolutely sure the plugin you\\\'re using is thread-safe ，you can have this option disabled .if you\\\'re experiencing crashes，try enabling it.

运用线程在辅佐机上安全运转形式

-假如你丫绝逼必定你运用的插件是安全的，能够禁用此选项。假如你妹的遇到溃散了，测验启用。

force whole GUI refresh

-forces the whole plugin\\\'s GUI refresh (depending on the plugin，it may increase CPU usage significantly).

添加图形界面改写

全插件的界面改写加速（这得取决于插件，此选项会他马添加CPU运用率）。

Dirty close

-if for some reason a bridged plugin doesn\\\'t get removed correctly，or its aux host keeps running after you removed it from your main host，enable this option(you should only enable this option if nothing else works)

封闭时铲除

-假如部分桥接插件没有得到正确移除，或许其辅佐机坚持运转后没有从你丫的宿主里移除，运用这个选项（承认没有工程在运用，再启用此选项，否则就2了）

Prevent main host control when the GUI window is closed

-Enabling (or disabling)this option can prevent opcode 15 errors ，depending on the plugin/host combination.

防备宿主操控GUI窗口时被封闭

启用（或禁用），此选项能够避免过错操作码15，依据插件/主机的不同来挑选此项

sluggish GUI hack

-IF you\\\'re experiencing extremely slow response when operating abridged plugin\\\'s GUI ，try enabling this option.

缓慢的GUI处理

-假如你丫的小霸王在操作时插件呼应得很缓慢。测验启用此选项。

Force child window clipping

-Sets additional window flags to prevent the GUI from being partially displayed.

强行对子窗口进行裁剪

-更改附加窗口标志，以避免额定部分不能显现

switch to separate GUI mode

-Self-explanatory -restart the bridged plugin for this change to take effect .

切换到独立的GUI形式

-如题，老子不解释-重新启动此更改收效。

Run in existing aux host

-loads the plugin in an aux host already running - restart the bridged plugin for this change to take effect

运转在现有的辅佐机

-装载辅佐机已经在运转的插件 - 重新启动此更改收效

I am getting a dispatcher opcode 19 error message

-If you\\\'re getting an error message refering this dispatcher opcode，or operating your bridged plugin\\\'s GUI causes a permanent hang，try enabling this option.

我得到一个过错信息调度操作码19

-假如你丫的收到此过错调度操作码，或绝逼必定插件的界面未呼应，测验启用此选项。

(note:these settings are saved in a file named.jbridge，in your plugin\\\'s folder.you may edit it manually if needed )